Sch 80 Sizes - PTFE, PVDF, PPL
- Item Number:
- 1
- Description:
- Sch 80 Sizes - PTFE, PVDF, PPL
- Nominal Size (in):
- 1
- Type:
- Sch. 80
- Suggested Minimum Flange Thickness (in):
- 1
Product Notes
- As shown here, the PART NUMBER (DTSF-NS-MF-L1-B-S) defines the series (see Series Key below), the connecting flange and nominal tube size NS, for double flange units - the mounting (or nozzle) flange size MF, and the insertion length L1. Use a decimal number to indicate NS. Then, replace MF with the decimal number to indicate the nominal size of the mounting flange and replace L1 with the insertion length in inches. Replace B with optional bend in degrees and add S for sparger.
- For example, a 1-1/2” Double-Flange Dip Pipe with a 4” mounting flange x 60” insertion length would be DTD-1.5-4-60
- Series Key: DTD = PTFE Double Flange; DKD = PVDF Double Flange; DPD = PPL Double Flange; DTSF = PTFE Single Flange (Full Face Type); DTSR = PTFE Single Flange (Ring Type); DKSF = PVDF Single Flange (Full Face Type); DKSR = PVDF Single Flange (Ring Type); DPSF = PPL Single Flange (Full Face Type); DPSR = PPL Single Flange (Ring Type)
- Standard flanges have ANSI Class 150 drilling. Class 300 and other sizes available.
- Standard tolerance on inserted length is ± 1/2". Closer tolerances available, contact factory.
- Standard distance (L2) between flange sealing faces is 5". To order non-standard spacing, contact factory.
- Most dimensions are governed by connecting flange size as shown in the Standard Dimension Table.
- Maximum standard overall length is 16 feet. For longer lengths, contact factory.
- For service conditions exceeding 350 F°, or 150 PSI, or vacuum service, contact factory.
- Links to Product Literature such as Installation Instructions can be found below the following table.
All Sizes
Click a row to load CAD and details above.
| Type |
|---|
| Sch. 80 |
| Item # | Nominal Size (in) | Suggested Minimum Flange Thickness (in) |
|---|---|---|
| 1Request Info | 1 | 1 |
| 2Request Info | 1-1/2 | 1 |
| 3Request Info | 2 | 1-1/2 |
| 4Request Info | 2-1/2 | 1-1/2 |
| 5Request Info | 3 | 2 |
| 6Request Info | 4 | 2 |